|
 |
 |
|
 |
The Extron MTP T 15HD RS transmitter sends high resolution computer-video and bi-directional RS-232 signals long distances to presentation displays over a single unshielded twisted pair cable (UTP cable). The MTP T 15HD RS transmits RGBHV, RGBS, RGsB, HDTV, and other high resolution video and serial communication signals to a compatible MTP R 15HD RS or MTP RL 15HD RS receiver. The MTP 15HD RS Series can be used with any CAT 5, 5e, or 6 twisted pair cable or with Extron Enhanced Skew-Free?A/V UTP cable for cable runs of up to 600 feet (185 meters) with XGA signals, and 450 feet (135 meters) with UXGA signals.
The MTP T 15HD RS accepts high resolution computer-video on a female 15-pin HD connector and serial communication signals on a female 3.5 mm captive screw connector. The MTP T 15HD RS also features a local monitor output for systems that require a local display. Compatible with resolutions up to 1600 x 1200 (UXGA), MTP T 15HD RS transmitters are ideal for such for applications such as large training facilities, museums, airports, movie theaters, and hotels.
Extron MTP 15HD RS transmitters and receivers precisely optimize image quality for various UTP cable lengths using adjustment controls on both the transmitter and receiver. The transmitters feature a pre-peaking switch that provides additional compensation at the front end for the longest cable runs. The receivers offer continuously variable gain and peaking controls, allowing users to dial in the exact amount of gain and peaking required for each unique cable run.
When using data grade twisted pair cable for sending high-resolution video signals long distances, a problem called skew can cause a distortion in the image, resulting in visible color separation. Extron offers two options for solving this problem and restoring image quality. The first option is to place an SEQ 100 15HD Skew Equalizer at the receiving end of any cable run where skew is a problem. The second option is to use Extron's Enhanced Skew-Free?A/V UTP Cable to make system connections.
MTP 15HD RS Series transmitters, receivers, and switchers are compatible with resolutions up to 1600 x 1200 (UXGA) and are ideal for such applications as large training facilities, museums, airports, movie theaters, and hotels. These products are well suited for any application that requires a cost-effective solution for sending RGBHV, RGBS, HDTV, component video, S-video, and composite video with serial control signals long distances over UTP cable.
Part of the VersaTools family of economical, compact products, the MTP 15HD RS Series is designed for easy integration into new and existing A/V environments. The entire family of Extron MTP 15HD products sets the price/performance standard for A/V twisted pair technology. The MTP 15HD Series is a complete twisted pair system including transmitters, receivers, and switchers, providing the ability to send, route, and distribute high resolution video, audio, and control signals. The MTP 15HD RS Series is ideal for systems where high resolution video signals must be transmitted long distances to a display, or where space is limited in conduit, or for systems where cabling might be exposed or visible. MTPs are compact so they can fit just about anywhere: in equipment racks, under tables and desktops, or next to a projector.
Sends video and bi-directional RS-232 signals up to 1,000 feet/300 meters over a single CAT 5, 5e, or 6 UTP cable
Compatible with RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
HDTV component video compatible (bi-level or tri-level sync)
Pre-peaking switch compensates for longest cable runs
LED power indicator on front panel
Compact 1U, quarter rack width, rugged metal enclosure
External international power supply included
| Video |
| Gain |
Unity |
|
| Video input and loop through |
| Number/signal type |
|
| MTP T 15HD RS |
1 analog RGBHV, RGBS, RGsB, RsGsBs, component;
or 1 S-video and 1 composite video;
or 3 composite video;
and 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits) |
| MTP R 15HD RS |
1 set of proprietary analog signals |
| Connectors |
|
| MTP T 15HD RS |
1 female 15-pin HD |
| MTP R 15HD RS |
1 female RJ-45 |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video |
| Minimum/maximum levels |
Analog: 0.3 V to 1.45 Vp-p |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 130 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
?50 mV |
|
| Video output |
| Number/signal type |
|
| MTP T 15HD RS |
1 set of proprietary analog signals |
| MTP R 15HD RS |
1 analog RGBHV, RGBS, RGsB, RsGsBs, component;
or 1 S-video and 1 composite video;
or 3 composite video; |
| Connectors |
|
| MTP T 15HD RS |
1 female RJ-45 |
| MTP R 15HD RS |
1 female 15-pin HD |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video |
| Minimum/maximum levels |
0.3 V to 1.45 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset |
?0 mV with input at 0 offset |
|
| Sync |
| Input type (MTP T 15HD RS) |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type (MTP R 15HD RS) |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Standards |
NTSC, PAL, SECAM |
| Input level (MTP T 15HD RS) |
3.5 V to 5.5 Vp-p |
| Output level (MTP R 15HD RS)l |
4.0 V to 5.0 Vp-p |
| Input impedance |
510 ohms |
| Output impedance |
110 ohms |
| Max. input voltage |
5.5 Vp-p |
| Polarity (MTP R 15HD RS) |
Positive or negative (DIP switch-selectable) |
|
| Control/remote ?external device (pass-through, bidirectional) |
| Serial control port input/output |
|
| MTP T 15HD RS |
RS-232 via a 3.5 mm, 3 pole captive screw connector |
| MTP R 15HD RS |
1 set of proprietary analog signals on a female RJ-45 jack |
| Serial control port output/input |
|
| MTP T 15HD RS |
1 set of proprietary analog signals on a female RJ-45 jack |
| MTP R 15HD RS |
RS-232 via a 3.5 mm, 3 pole captive screw connector |
| Baud rates |
Up to 38400 bps at up to 500' (152 m) (Higher data rates are possible. Performance will vary based on baud rate and cable length.) |
| Protocol |
Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none |
| NOTE |
|
Protocol is mirrored between the transmitter and the receiver. | |
| Serial control pin configurations |
Captive screw connectors: 1 = TX, 2 = RX, 3 = GND |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A, regulated |
| Power input requirements |
12 VDC, 0.5 A |
| Temperature/humidity |
Storage -40?to +158캟 (-40?to +70캜) / 10% to 90%, noncondensing
Operating +32?to +122캟 (0?to +50캜) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with optional rack shelf, part #60-190-01, #60-604-01, #60-190-20, or #60-604-20
Also furniture mountable with optional mini under-desk mount kit #70-212-01 or projector mountable with bracket kit #70-077-04 |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.) |
| Product weight |
0.4 lbs (0.2 kg) |
| Shipping weight |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
